Tensile Isis Fixie /BMX Crank & Spider Set
- Brand: Tensile Optimum
- Model:Fixie/BMX/DJ Crank Set (LESS THAN HALF PRICE)
- A top of the rangeFixie, BMX or Dirt Jump crank set made from 7075 T6 Heat treated Alloy.
- 175 mm elegant CNC machined ultra stiff but super light cranks.
- Four arm splined spider with BCD of 104mm.
- Price includes UK delivery. Please e-mail for quote anywhere else.
- Isis drive cranks for super secure driving. Steel 9/16” threaded pedal inserts for ultra secure pedal fit.Incredibly light but stiff cranks Weight: Cranks Complete with 4 arm spider- 544 grams. See Picture Below.
- Ultra Light 4 arm Spider with light alloy lock ring. Takes up to three rings.
- Super light but ultra strong and stiff crankset from Tensile, ideally suited for Fixies, BMX race or Dirt Jumping with Single Chainring. Fine CNC machining including the four arm multi-position six splined spider.
- Can be used equally as well on double or triple cranks. Watch out for the new range of Tensile four arm chainrings being launched in 2014. Why not combine your purchase with a Tensile Isis sealed Bottom Bracket
Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check crank bolt torque is at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely to damage your cranks and this will not be covered under warranty.
